Phone 1-800-462-9312 ask for Dean
|
The
700R4 transmission can be used in street rods, show cars, towing vehicles
etc. Gm used this transmission in S10's, Caprices, full size 4X4
trucks, Camaros and more. GM has a different shift feel and torque
capacity for almost every type vehicle made. This is done by using a
multitude of different valves, servos and springs. It's no
surprise some shift improvers don't work. We have researched this
transmission to find out what valves, servos and springs give the most
torque capacity. These parts along with the rest of our kit will
provide firm shifts at low speeds and hard car launching shifts when
you step hard into the throttle. This is our High Performance
700R4 improver. (Pro Shift Improver part #PRO785PN) If you are using a 700R4
transmission in a vehicle that does not have a computer you will need
some type of switch to turn the TCC solenoid on and off. Our
converter clutch control switch (part #PRO458) is designed to
automatically turn the TCC solenoid on in 4th gear. Unlike most
TCC switches that are installed on the outside of the transmission
ours is installed on the inside to avoide transmission leaks. Our
switch comes complete with an intallation sheet.
|
Instruction sheet to install the 700R4 Trans with Pro Shift Tcc Switch
|
Corvettes valvebodys will allow a full throttle up shift in to OD
without changing the 1 to 2 and 2 to 3 shift timing witch should be
around 5000 RPMs
|
|